Pop-top size
98mm Pop-Top Tubes for Single Pre-Rolls
A 98mm pop-top tube is the in-between size for single pre-rolls. It gives more length than the 90mm, for half-gram joints with a long twist or tip and some shorter three-quarter-gram joints, while staying shorter than a 116mm king-size tube.
- Common use
- Single joints needing extra length
- Typical fill
- Half-gram, some 0.75 g
- Size
- 0.7" × 3.9"
Pre-roll sizes and flower weights are common starting points, so we confirm fit with your product. Talk to a packaging expert: 888.909.9402
Best for
- Single pre-rolls
- Many half-gram joints
- Shorter 0.75 g joints, after a sample fit
- Joints that need room around the twist or tip
Pairs well with
- 90mm Pop-Top TubeA snugger fit for standard half-grams.
- 116mm Pop-Top TubeFull length for king-size joints.
Good to know
- The 98mm is the tube's size, not the cone it holds. A 98mm cone usually needs the 116mm tube.
- Measure the finished joint, tip and twist included.
Compare
Pop-top sizes side by side
| Pop-top size | Common use | Typical fill | Best for |
|---|---|---|---|
| 78mm Pop-Top Tube | Mini pre-rolls, dogwalkers | Often ~0.3 g, 70mm cones | Mini pre-rolls |
| 90mm Pop-Top Tube | Half-gram single joints | Often 0.5 g, 84mm cones | Many 0.5 g pre-rolls |
| 98mm Pop-Top Tube | Single joints needing extra length | Half-gram, some 0.75 g | Single pre-rolls |
| 116mm Pop-Top Tube | King-size single joints | Often 1 g, 98–109mm cones | King-size single joints |
| Wide 116mm Pop-Top Tube | Thick, infused or multiple joints | Count set by your pre-rolls | Wider pre-rolls |
| 13 Dram Pop-Top Container | Small flower sizes, samples | About 1–2 g | About 1–2 g of flower |
| 19 Dram Pop-Top Container | Eighth-ounce flower | About 3.5 g | About 3.5 g of flower |
| 30 Dram Pop-Top Container | Quarter-ounce flower | About 7 g | About 7 g of flower |
| 60 Dram Pop-Top Container | Half-ounce flower | About 14 g | About 14 g of flower |
| 90 Dram Pop-Top Container | Ounce-size flower | About 28 g | About 28 g of flower |
98mm Pop-Top Tubes for Single Pre-Rolls questions
All pop-tops & dramsWhat does a 98mm pre-roll tube hold?
One single pre-roll that needs a bit more length than a 90mm tube gives: many half-gram joints with longer tips or twists, and some shorter 0.75 g joints.
What's the difference between 90mm and 98mm tubes?
Length. They're the same width; the 98mm is about 8mm longer, which gives room for a longer twist, tip or slightly bigger joint.
Can a 98mm tube hold a 98mm cone?
Usually not. The tube's size isn't its inside length, and a finished 98mm cone plus its twist needs room for the lid. Most 98mm cone pre-rolls go in the 116mm tube.
How do I confirm my pre-roll fits?
Send us the finished length, the widest point, and the tip or twist, or just mail a few finished pre-rolls. We'll check them against the 98mm tube, including room for the lid to close, before you order.