Pop-top size
90mm Pop-Top Tubes for Half-Gram Pre-Rolls
A 90mm pop-top tube holds a short single pre-roll, including many half-gram joints made with 84mm (1¼ size) cones. Pick it when you want a smaller package than a king-size tube.
- Common use
- Half-gram single joints
- Typical fill
- Often 0.5 g, 84mm cones
- Size
- 0.7" × 3.5"
Pre-roll sizes and flower weights are common starting points, so we confirm fit with your product. Talk to a packaging expert: 888.909.9402
Best for
- Many 0.5 g pre-rolls
- 84mm cones, depending on the finished size
- 1¼ size single joints
Pairs well with
- 78mm Pop-Top TubeShorter, for minis and dogwalkers.
- 98mm Pop-Top TubeA little more length for longer tips or twists.
Good to know
- 84mm cones are a common match, but a long twist or tip can push past it.
- If the fit is tight, the 98mm tube adds about 8mm of length.
Compare
Pop-top sizes side by side
| Pop-top size | Common use | Typical fill | Best for |
|---|---|---|---|
| 78mm Pop-Top Tube | Mini pre-rolls, dogwalkers | Often ~0.3 g, 70mm cones | Mini pre-rolls |
| 90mm Pop-Top Tube | Half-gram single joints | Often 0.5 g, 84mm cones | Many 0.5 g pre-rolls |
| 98mm Pop-Top Tube | Single joints needing extra length | Half-gram, some 0.75 g | Single pre-rolls |
| 116mm Pop-Top Tube | King-size single joints | Often 1 g, 98–109mm cones | King-size single joints |
| Wide 116mm Pop-Top Tube | Thick, infused or multiple joints | Count set by your pre-rolls | Wider pre-rolls |
| 13 Dram Pop-Top Container | Small flower sizes, samples | About 1–2 g | About 1–2 g of flower |
| 19 Dram Pop-Top Container | Eighth-ounce flower | About 3.5 g | About 3.5 g of flower |
| 30 Dram Pop-Top Container | Quarter-ounce flower | About 7 g | About 7 g of flower |
| 60 Dram Pop-Top Container | Half-ounce flower | About 14 g | About 14 g of flower |
| 90 Dram Pop-Top Container | Ounce-size flower | About 28 g | About 28 g of flower |
90mm Pop-Top Tubes for Half-Gram Pre-Rolls questions
All pop-tops & dramsWhat does a 90mm pre-roll tube hold?
One short single pre-roll, most often a half-gram joint made with an 84mm (1¼ size) cone.
Will an 84mm half-gram pre-roll fit in a 90mm tube?
Usually, yes. It's a common pairing. A twisted end or longer filter tip can add length, so we confirm with your finished pre-roll before you order.
How does the 90mm tube compare with the 98mm?
Same width, about 8mm shorter. Choose the 90mm for a snug half-gram package, or the 98mm if your joints need extra room at the tip or twist.
Can I customize the packaging for my brand?
Yes. Pick black, white, clear or a custom Pantone color, then add a label, or skip labels with IML (in-mold labeling), where your design is molded into the part in matte, gloss or metallic foil. We'll go over the options for your quantity on your quote.