Pop-top size
116mm Pop-Top Tubes for King-Size Pre-Rolls
A 116mm pop-top tube is the standard tube for king-size joints and other full-length single pre-rolls. It's the usual pick for pre-rolls made with 98mm and 109mm cones, including many 1 g joints.
- Common use
- King-size single joints
- Typical fill
- Often 1 g, 98–109mm cones
- Size
- 0.7" × 4.6"
Pre-roll sizes and flower weights are common starting points, so we confirm fit with your product. Talk to a packaging expert: 888.909.9402
Best for
- King-size single joints
- Many 109mm cone pre-rolls
- Many 1 g pre-rolls
- Longer pre-rolls
Pairs well with
- Wide 116mm Pop-Top TubeSame height, wider, for thick or infused joints.
- 98mm Pop-Top TubeA shorter tube for half-gram joints.
Good to know
- Check the widest point as well as the length.
- Thick wraps, big tips and infused coatings may need the wide 116mm.
Compare
Pop-top sizes side by side
| Pop-top size | Common use | Typical fill | Best for |
|---|---|---|---|
| 78mm Pop-Top Tube | Mini pre-rolls, dogwalkers | Often ~0.3 g, 70mm cones | Mini pre-rolls |
| 90mm Pop-Top Tube | Half-gram single joints | Often 0.5 g, 84mm cones | Many 0.5 g pre-rolls |
| 98mm Pop-Top Tube | Single joints needing extra length | Half-gram, some 0.75 g | Single pre-rolls |
| 116mm Pop-Top Tube | King-size single joints | Often 1 g, 98–109mm cones | King-size single joints |
| Wide 116mm Pop-Top Tube | Thick, infused or multiple joints | Count set by your pre-rolls | Wider pre-rolls |
| 13 Dram Pop-Top Container | Small flower sizes, samples | About 1–2 g | About 1–2 g of flower |
| 19 Dram Pop-Top Container | Eighth-ounce flower | About 3.5 g | About 3.5 g of flower |
| 30 Dram Pop-Top Container | Quarter-ounce flower | About 7 g | About 7 g of flower |
| 60 Dram Pop-Top Container | Half-ounce flower | About 14 g | About 14 g of flower |
| 90 Dram Pop-Top Container | Ounce-size flower | About 28 g | About 28 g of flower |
116mm Pop-Top Tubes for King-Size Pre-Rolls questions
All pop-tops & dramsWhat does a 116mm pre-roll tube hold?
One full-length single pre-roll, most often a king-size joint made with a 98mm or 109mm cone.
Is the 116mm tube right for a 1 g king-size joint?
It's the size most brands use for 1 g king-size joints. Confirm the finished length and width, since a thick joint may need the wide version.
When should I choose the wide 116mm instead?
When the joint is too thick for the standard tube: blunt-style wraps, oversized tips, infused or coated pre-rolls, or more than one pre-roll per tube.
Can I customize the packaging for my brand?
Yes. Pick black, white, clear or a custom Pantone color, then add a label, or skip labels with IML (in-mold labeling), where your design is molded into the part in matte, gloss or metallic foil. We'll go over the options for your quantity on your quote.